Sunday, January 30, 2011

How to apply chain lube

1.First you need to clean you chain thoroughly. For that use some good chain cleaners.(I use Motul chain cleaner.)
Motul chain cleaner

 2. Apply the cleaner on your chain and wait for 10 minutes.

3.Clean it thoroughly using a rag cloth and make sure that no dirt is left on it.

4. Now is the time for applying chain lube.(Here also I use Motul chain lube)
Motul Chain lube
5.Apply the chain lube on your chain. Make sure that you apply it only on the inner side of the chain.


Done :)

How to enable facebook email?



1.First you need a facebook email address so go to http://www.facebook.com/username/ and pick your user name. You will get somename@facebook.com as your facebook email address.

2.Now you need to send a request for email service. For this go to this link http://www.facebook.com/about/messages/ and click send request button at bottom right.

3.Once you click, the status will change to "you will receive an invitation soon".

4.Wait one or two days , facebook email service will get activated.

5.Go to messages in facebook and see the differece :)

Saturday, January 29, 2011

USB devices not getting detected in Vista

Have you experienced trouble in detecting some new usb devices while your old ones are working fine.?
I hope this blog will help you solve the problem.

Note: Remove all your usb devices.

1.Go to your windows directory ( usually c:\windows )

2.Go to folder "inf" (c:\windows\inf)

3.Locate the file "INFCACHE.1" and delete it. ( Make sure that you create a backup of this file before deleting. Also you may need to change the access rights by going to security tab in properties of that file in order to delete)

4.Now plug in an usb device that used to work fine.

5.After that try plugging in the one that didn't work.

This should solve the problem :)  Else after step 3



4. Download the following file.  Click here to download

5.You can find 3 files in it. Find those files in the windows directory and copy and replace it with the new ones.
      (note1: Create a backup of all the files you are going to replace )
      (note2: Files may be located in folder 'windows\drivers' or 'windows\inf' or 'windows\winsxs' or some other )
      (note3: You may have to change the owner of the files from properties>security>advanced>owner>edit to replace the files)

6.Restart your PC

7.Plug in the device that didn't get detected earlier.

8.Go to device manager (Right click my computer and click manage, in that select device manager under system tools.)

9.You may see some unknown USB device with a yellow exclamation mark or question mark.

10.Right click it and select properties and select driver tab and click Update driver. And for the driver location give 'windows\winsxs' (assuming windows as your windows root directory)

11.After driver is installed restart your PC


Hope this solves your problem :)

Unhide hidden Administrator account in Vista/7


1. Click start and type command prompt .
2. Right click command prompt and click run as administrator.

3. type "net user administrator /active:yes"
      (note: this admin account won't have any password as of now)
4.Log out current user and check. The administrator account must now be visible.

To hide the account:
                type "net user administrator /active:no" in command prompt.

THE END :)

Sunday, January 23, 2011

Mysql Dump

In this blog I will show you how to dump a mysql database into a .sql file and also restore it later.

Info :
    Mysql Username: root
    Mysql Password: password
    Database           : mydb

Dumping to a file : Take command prompt and type
          E:\ mysqldump -u root -p mydb > mydb.sql
          Enter Password: password              
       (Note: Use your mysql username and password insted of 'root' and 'password'.)

The whole database will be dumped to a file called mydb.sql in the folder E:\

Restoring the database:  Take command prompt. (First we need to create a new empty database)
                                    
          E:\ mysql -u root -p
          Enter Password: password
          mysql> create database mynewdb;
          mysql> use mynewdb
          mysql> source E:\mydb.sql
      (Note: Change E:\mydb.sql accordingly to point to your .sql file)

THE END :)

Saturday, January 15, 2011

The so called RUST!!

This is rust
For the formation of rust, there are three requisites
1.Iron object.
2.Water.
3.Oxygen.

When all the above three conditions are present, rust is formed on the iron object which eventually erodes away destroying the entire object.

Chemical action

For a chemical reaction to take place an anode, a cathode and an electrolyte is required. We already got all the three parts so the reaction will take place.

anode: Iron
cathode: Oxygen
electrolyte: Water

Note: Salt water is a better electrolyte than pure water.

steps:
1. O2 get converted into OH-
2. Fe gets converted into Fe2+
3. Some of Fe2+ gets converted to Fe3+
4. Fe2+ and Fe3+ gets converted to Fe(OH)2  and Fe(OH)3
5. These two finally get converted to Fe2O3·nH2O(RUST!!!)


The Prevention and Cure

  • Keep the object away from water and moisture
  • Put some oil in the possible areas of rust formation( because oil keeps water away)
  • Put some coating. e.g., paint, wax etc.
  • Scrub away the rust formed so far using blade or sandpaper. Afterwards apply primer(base coating of paint) and paint.

THE END :)